Control Option Command

Is it hypocritical of me to write about a Flash blocker when I’ve spent a good portion of my time the last four years doing Flash? Maybe, but some of the sites out there have ridiculous amounts of intrusive and annoying banner ads, and I just can’t stand having my the fans on my Mac blowing a fuse every time I want to check out the news.

My favorite implementation of Flash-blocking has always been ClickToFlash which is a Safari-only plugin that works exactly as advertised. You click the element to load Flash. Sadly, as mentioned, it’s Safari-only and my browser of choice these days is Google Chrome.

Fortunately I found a port, or perhaps a backwards engineered version for Chrome named, somewhat more aggressively, Kill-Flash. It works on exactly the same principle. All Flash elements are replaced with an inconspicuous grey-scale gradient with the label “Flash”, and you “Click To Flash”… Duh.

Stupidly however, I have found no simple way to add sites to the plugins whitelist. A few sites (YouTube and GMail) are whitelisted by default, but no option that I’ve found to add new sites. There are several sites I visit on a regular basis and where I want to see the Flash. Hell, my own blog uses several (subtle, I hope) Flash elements and I don’t need to see those grey boxes every time I come here. In fact, personally I think perhaps a “blacklist mode” would be my preferred way to operate.

So, anyway. I started digging around in the Library to figure out how to add sites to the whitelist. The first issue of course is to find out where the whitelist is located. A couple of headscratches later I found that this is the file you need to deal with:

/Users/USERNAME/Library/Application\ Support/Google/Chrome/Default/Extensions/kfncbcioneejfnnelcdmocdjncbmceea /1.1/kill_flash.js

I’m not sure whether or not that crazy string is the same for everyone or generated randomly for each installation. If you see the kill_flash.js you’re there.

Opening this file reveals, at the very top the following variable.

What you need to do is simply append the domains you want to whitelist to this array, in quotes and separated by commas. Like so:

When you’ve done this you might want to create an alias for easy access to the file. Personally I just dragged it to my Dock for the sake of convenience.

I might at some point write an AppleScript or something to make this easier. If that ever happens I’ll be sure to post it here.

Every so often I stumble across something that really just leaves me dumbfounded. The only valid response seems to be “… Fascinating!”

The latest is this clever JAPH consisting solely of keywords.

In short; The Perl community has a meme going where you are supposed to write a snippet returning the String “just another perl hacker” in the most convoluted and obfuscated way possible.

This gem does exactly that. It’s beautiful in that there are no Strings in there, only valid Perl keywords, and it’s perfectly justified. For some reason this kind of useless stuff really appeals to me at a deep level. I fear a couple of hours may be lost to trying to create a clever JAAH.

When Iceland went bust and started selling .is domains I grabbed martin.is. Of course I did. That’s the kind of guy I am. Even as I swiped that credit card (and by “swipe” I mean “typed in all my info into the appropriate boxes.”) I knew I had no idea what I was going to use it for, but what the hey; I’ve done plenty of even stupider domain purchases that never led to anything¹.

So finally, the other day I decided to set up a “lifestream”. An aggregate feed of all the highly interesting stuff I do on the web. Not because I think anyone particularly needs or wants to know. It just seemed like the kind of thing that goes on a domain called “martin is”.
I really didn’t want to spend loads of time on this. I have a job, a daughter and a blog that are all already wailing for my attention, so tried plugging all my stuffs into a WordPress install using FeedWordPress and a couple of other similar plugins, but I found the results to be (unreliable | explosive | bewildering)².

Alrighty then. What services do I know of that aggregate information like this? FriendFeed! I headed over to FF, and sure enough; Within half a minute I had managed to plug all the crap I generate into one massive hunka’data. In addition to supporting a bunch of services Friendfeed actually does pretty well parsing feeds from other sources and cutting the entries into little blurbs. Now only to get it out of there and onto my domain.

Read the rest of this article »

I noticed that my little app for migrating your data from Things to The Hit List still gets some hits. I haven’t really looked at it for ages, but I wasn’t terribly surprised to see that it’s broken under Snow Leopard.

I decided to fix it, expecting AppleScript projects in Xcode to work pretty much the same that they did before, and brother was I mistaken.

It seems that Apple decided AppleScript as a simple to grasp scripting language really has no place in Xcode anymore, and Cocoafied the bejeezus out of it. On the surface using the new Cocoa / AppleScript bridge feels like playing a nazi in most hollywood war movies. You’re still speaking English (Cocoa), just with a horrible German (AppleScript) accent.

The Migrator is just a little quick and dirty utility app, which AppleScript is perfect for, but rewriting this for 10.6 I felt I might as well have ported it to Cocoa (since I’m in the process of learning Objective C anyway). I didn’t though. I hacked my way through it using the Bridge, and I felt like Xcode was berating me the whole time.

I’m excited about Cocoa and Objective-C, but I loved AppleScript for what it was. I’m still going to be using AppleScript a lot, but unless I “See the light” of the Cocoa Bridge, I don’t think I’ll be making any GUI apps with it anymore. I also find it telling that there seems to be no documentation for the Cocoa / AppleScript Bridge except for the release notes that I can find.

Rant over.

Disclaimer:

• This works fine for me. I make no guarantees that it’ll work for you. I think it will, and I’ll try to help you out if it doesn’t, but I’m not liable if your Mac explodes.
• Caution: If you check the “Delete items from Things” option your items will be deleted from Things.
• In order for this to work the app will empty your Things trash can regardless. If you really need the stuff in the Things trash can, perhaps it shouldn’t be in the trash.
• I don’t have a Leopard machine handy, so I haven’t tested the Leopard version since I first posted it in May. It worked then, so it should work now.

Github
App – Leopard
Source Code – Leopard
App – Snow Leopard
Source Code – Snow Leopard

TextMate TextMate TextMate. I might as well make this a pure TextMate blog soon, but I can’t help it. My love for this app is overwhelming.

I spend a lot of my time writing ActionScript, and one thing I’ve always envied users of Flex Builder (Which I avoid if I can) and FlashDevelop (which isn’t available on the Mac) is the auto-importing of classes, I.E. when you type

the IDE checks whether that class is already imported, and if not imports it.

Now, what I’ve managed to do still isn’t even close to that functionality and let me say right away that the meat of this trick is the excellent work by the creator of the ActionScript 3 bundle for TextMate; Simon Gregory et al.

Simon has in his bundle included a ‘Auto complete imports’ command which searches both the packages in your project and the packages included from Adobe (flash.*) which makes it easy to get completion for any class you’d want to import.

Like so:

• You want to import the

  1	flash.net.URLLoaderDataFormat;

  class, which is a long-ass line to type out.

• Instead you type ‘URL’ and trigger the auto-complete command. You’ll get a drop-down with all classes starting with “URL” and then choose the proper one.

• 1	import flash.net.URLLoaderDataFormat;

  is typed out for you. Yay!

However, now you have to copy that text, move on up to your import statements, paste it and then find your way back to where you were.

Boy do I wish I knew Ruby well enough to actually just augment that command to make it obey my wishes, but alas; My ruby-Fu is weak and so I turned to the weapon of the feeble TextMate hacker; Macros.

Basically the workflow now is:

• Perform the steps as mentioned above to get the completion for your import. However; This time the output would be

  1	import flash.net.URLLoaderDataFormat; move

  . The ‘move’ at the end there will work as a tab trigger for the macro, so the next step is to press tab, and then (hopefully) the import statement is moved up to it’s brethren, and you end up back where you were. Here’s how it works.

• When you press tab you trigger the macro which will perform the following steps:
• Select the line with the import and cut it.
• Enter the word ‘asdf’ in place of the import statement.
• Search for the last occurrence of the word ‘import’ in the document.
• Move to the line below said last import.
• Paste the import statement from the clipboard and indent it properly.
• Search for ‘asdf’ in the document and delete it, leaving the caret at the position it was when you launched the macro.

Like I said; It’s more of a hack than anything else and if someone comes up with a proper solution please let me know. The main weaknesses here are:

• You can’t just hit the combo in the process of typing out a statement. If you trigger the auto completion at the word ‘Sprite’ in

  1	var s:Sprite = new Sprite();

  The line

  1	import flash.display.Sprite;

  will end up in the middle of the statement. Likewise if you trigger the combo on the same line as any other code, that code will end up with the imports. The command must be triggered on a line of it’s own.

• Dependencies: If you want to change the tab trigger to something else than ‘move’ you’ll have to change the output from the auto-complete as well.
• Not really all that elegant. Having to do two actions (even though one is just pressing tab) seems a hassle.

With all that out of the way: Grab it if you want it!
Zip here.
Please note: I didn’t really want to distribute a modified version of Simons work, so if you want to output the ‘move’ keyword for the tab trigger you need to go into the ‘Auto Complete Imports’ command of the ActionScript 3 bundle in the Bundle Editor and make a miniscule edit at the bottom of the code.

That’s all folks.